Selecting Input Source - Eiki LC-HDT10 Owner's Instruction Manual

Eiki multimedia projector model lc-hdt10 owner's instruction manual
Hide thumbs Also See for LC-HDT10:
Table of Contents

Advertisement

DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3/4
buttons on Side Control or INPUT 1, INPUT 2, INPUT 3 and
INPUT 4 on Remote Control Unit.
MENU OPERATION
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
2
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
WHEN SELECT INPUT 1 (SDI TERMINAL )
Move a pointer to either SDI 1 or SDI 2 and press SELECT button.
WHEN SELECT INPUT 2 (5 BNC TERMINAL)
Move a pointer to source that you want to select and press SELECT
button.
RGB
When connect a computer output [5 BNC Type (Red, Green, Blue,
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb,
H/HV and V jacks.
Y, Pb/Cb, Pr/Cr
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
WHEN SELECT INPUT 3 (DVI TERMINAL)
Move a pointer to source that you want to select and press SELECT
button.
RGB(Analog)
When your computer is connected to INPUT 3 (ANALOG) terminal,
select RGB(Analog).
RGB(Scart)
When video equipment is connected to INPUT 3 (ANALOG) terminal,
select RGB(Scart).
RGB(PC Digital)
When your computer is connected to INPUT 3 (DIGITAL) terminal,
select RGB(PC Digital).
RGB(AV HDCP)
If a HDCP-compatible signal source is connected to the INPUT 3
(DIGITAL) terminal, select RGB(AV HDCP).

SELECTING INPUT SOURCE

BASIC OPERATION
INPUT 1/2 button
INPUT 1-4 buttons
INPUT 1
INPUT 2
INPUT 3/4 button
INPUT 3
INPUT 4
INPUT MENU
INPUT Menu icon
Move arrow to INPUT source
that you want to select, and
then press SELECT button.
Input 1
Input 3
NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Input 2
25

Advertisement

Table of Contents
loading

Table of Contents