Lens Installation; Positioning Projector; Lens Shift Adjustment - Eiki LC UXT1 LC-UXT1 LC-UXT1 Owner's Instruction Manual

Before setting up a projector, install Projection Lens on a Projector.
1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection
Lens, refer to manual separately attached or contact sales dealer where you purchased a projector.
2. For installation, refer to installation manual supplied to a Projector.
When moving or setting up a projector, be sure to replace a Lens Cover to protect a surface. And be
careful not to hold or subject a lens to strong forces. It may damage lens, cabinet, or mechanical
parts.
This projector is designed to project on a flat projection
surface.
ROOM LIGHT
Brightness in room has a great influence on picture
quality. It is recommended to limit ambient lighting in
order to provide best image.
VENTILATION
This projector is equipped with cooling fan to protect it from over-
heating. Pay attention to following to ensure proper ventilation
and avoid a possible risk of fire and malfunction.
Do not cover vents with papers or other materials.
Keep rear grill at least 3 feet (1 m) away from any
object.
Make sure that there are no objects under a projector.
An object under a projector may prevent a projector
from taking cooling air through bottom vent.
Projection lens can be moved up, down, left and right with motor-driven lens shift function. This function makes
it easy to provide projected image where you want.
Use LENS SHIFT button and
POINT UP/DOWN button to
move image up or down.
(Refer to page 23.)
MOVED UP OR DOWN

LENS INSTALLATION

POSITIONING PROJECTOR

LENS SHIFT ADJUSTMENT

PREPARATION
SCREEN
EXHAUST VENT
AIR INTAKE VENT
(REAR SIDE)
(BOTTOM SIDE)
Use LENS SHIFT button and
POINT LEFT/RIGHT button to
move image left or right.
(Refer to page 23.)
MOVED LEFT OR RIGHT
9