Picture Screen Adjustment - Eiki LC UXT1 LC-UXT1 LC-UXT1 Owner's Instruction Manual

Eiki multimedia projector owner's instruction manual
Table of Contents

Advertisement

COMPUTER INPUT
This projector has a picture screen resize function, which enables you to display desirable image size.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
2
Press POINT DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
Normal
Provides image to fit screen size.
True
Provides image in its original size.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, ON-SCREEN MENU disappears
and message "D. Zoom +" is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan image. Panning function can work only when image
is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM
button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected, ON-SCREEN MENU disappears
and message "D. Zoom –" is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
/ , SELECT, POINT and AUTO PC ADJ. buttons.
34

PICTURE SCREEN ADJUSTMENT

SCREEN MENU
Move a red frame to function and press
SELECT button.
NOTE
True and Digital zoom +/– cannot be operated
when "RGB", "1035i (HDTV)", "1080i50 (HDTV)" or
"1080i60 (HDTV)" is selected on PC SYSTEM
Menu (P27).
Wide cannot be selected when "720p (HDTV)",
"1035i (HDTV)", "1080i50 (HDTV)" or "1080i60
(HDTV)" is selected on PC SYSTEM Menu (P27).
This projector cannot display any resolution higher
than 1600 X 1200. If your computer's screen
resolution is higher than 1600 X 1200, reset
resolution to lower before connecting projector.
Image data in other than UXGA (1600 x 1200) is
modified to fit screen size in initial mode.
Panning function may not operate properly if
computer system prepared on PC ADJUST Menu
is used.
SCREEN Menu icon

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-uxt1

Table of Contents