Table of Contents
Advertisement
Axle Bracket
Locknut
NOTE: To obtain the desired front seat to floor height (for details, see Seat-to Floor
Height paragraph), it will be necessary to perform one or both of the following:
• Changing the mounting position on the fork. Refer to
Removing/Installing/Repositioning the Castor Assemblies paragraph.
• Changing the fork size or adding/removing height adjustment spacers. Refer to
Adjusting Forks paragraph.
• Changing the rear height positioning and /or the seat angle. Refer to the table
below.
SEAT ANGLE 3°
REAR WHEEL
SEAT HEIGHT
485 mm
510 mm
FIGURE 5.1 Removing/Installing Rear Wheels
FRONT CASTOR
24"
8"
1
1
2
2
SECTION 5—REAR WHEELS/FRONT CASTORS
Axle Brackets
Hardware
Brake Hardware
Washers
2 2
Fixed Axle
Transit Brake
1 = 485 mm
2 = 510 mm
1
2
Advertisement
Table of Contents
