Precautions; To Change The Am Tuning Interval - Sony FH-211W Operating Instructions Manual

'•
, ....
'
,.
' P RECAUTIONS , . . . · . i:
.
.
'..
.
~
'
~
.
On safety
• Operate the unit only on 120 V AC, 60 Hz.
• Unplug the stereo system from the wall outlet if it is not to
be used for an extended period of time. To disconnect the
cord, pull it out by grasping the plug. Never pull the plug out
by the cord.
• Should any solid object or liquid fall into the component,
unplug the stereo system and have the component
checked by qualified personnel before operating it any
further.
On installation
• Do not place anything on top of the unit. The ventilation
holes must be unobstructed for the proper operation of the
unit and to prolong the life of its components.
• Avoid installing or leaving the unit in a location:
- near heat sources such as radiators, airducts or heaters
- subject to direct sunlight
- exposed to rain or moisture
- where it is liable to come into contact with dust or dirt
- that is unventilated, such as a bookcase
When transporting the unit
To transport the unit, attach the supplied carrying handle.
If you have any question or problem concerning your unit
that is not covered in this manual, please consult your
nearest Sony dealer.
For repairs, take in all the components together, even if only
one needs repairing.
For detailed safety precautions, see the leaflet "IM PORT ANT
SAFEGUARDS".
4
. T O CHANGE THE AM
. ' J.UNING INTERVAL
.
.
The AM tuning interval is preset at the factory to 10 kHz. To
· change the interval to match the frequency allocation
system of your area, proceed as follows.
1 Depress POWER.
2
Tune in any AM station.
3 Press POWER to turn the power off and wait for a few
seconds.
4
While pressing the"+" TUNING, press POWER to turn the
power on.
The AM tuning Interval has been set to 9 kHz.
To reset the interval to 1
O
kHz, follow the above steps.
When the interval is changed, all the memorized stations will
be erased.