Table of Contents
Advertisement
After the adjustment is completed, click
calibration parameters, and the calibration will take effect after saving.
(5) Lock calibration function
After the calibration is saved, click
controls will return to normal functionality after being locked.
FIRMWARE UPGRADE
Click System Settings and select Firmware, as shown in Figure 11. Click
firmware. When there is a new version, the user can click on the control to perform a firmware
update on the Lidar.
Note:During the upgrade process,keep the Lidar power supply normal,communication
stable,network steady.Do not plug or unplug the Lidar serial port.
SOFTWARE UPGRADE
The client software will be version-changed and users can update to the latest version for a better
experience.
Click System Settings and select Update, as shown below:
the system will automatically save the
again to lock the function to prevent misoperation. these
FIGURE 13 SYSTEM UPDATE PAGE
www.ydlidar.com Copyright 2015-2019 EAI
to get the latest
10 /
12
Advertisement
Table of Contents
