Microsoft RoundTable Setup Manual page 20

20 Microsoft RoundTable Setup Guide
2. Plug both RJ11 connectors attached to the satellite microphones into the RJ11
jacks at the bottom of the device.
3. Run the RJ11 cables through the conduit so that the cords are securely lodged
and sit below the surface of the Microsoft RoundTable base bottom.
4. Place the Microsoft RoundTable device upright on the table and check to see
that the RJ11 cords do not disrupt the stability of the device. If so, return to the
previous step and make certain the RJ11 cables are lodged securely into the
conduit.