Reference-Ets-Parameter; General Settings - MDT KNX Smart 55 BE-JTA5504.01 Technical Manual

Technical Manual
Blind Push Button Smart 55

4 Reference-ETS-Parameter

4.1 General Settings

The following picture shows the menu for the general settings:
Figure 3: General Settings
The following table shows the possible settings:
ETS-Text
Startup time
Send „Operation" cyclically
Value for Day/Night
Behavior after bus power return
Time/Date
Day/Night object
Status/Values for toggle
Polarity Shading
Language Display
Table 5: General Settings
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
13
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
BE-JTA5504.01
Dynamic range
[Default value]
2 – 240 s
[2 s]
not active
1 min – 24 h

Day = 1 / Night = 0

Day = 0 / Night = 1

no request

request

no request

request

no request

request

lock at value 1

enable at value 1

German

English
Comment
Sets the time between restart and
functional start-up of the device
Setting whether and at what
interval a cyclical "In operation"
telegram should be sent.
Sets the polarity for Day / Night
switchover
Setting whether the values/objects
should be requested automatically
on bus voltage return.
Setting whether the Shading
should be enabled or disabled with
a "1".
Setting the language for texts in
the display