MDT KNX Smart 55 BE-JTA5504.01 Technical Manual page 12

Technical Manual
Blind Push Button Smart 55
No. Name
41 Logic A
42 Logic A
43 Logic A
44 Logic A
45 Logic A
+ 5 next Logic
Table 4: Communication objects – Standard settings: Logic
The table above shows the preset default settings. The priority of the individual communications
objects and the flags can be adjusted by the user as required. The flags assign the communication
objects their respective tasks in programming, where C stands for communication, R for read, W for
write, T for transmit and U for update.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
12
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
BE-JTA5504.01
Standard Settings – Logic
Object Function
Input logic 1
Input logic 2
Input logic 3
Input logic 4
Output Switch
Ausgang Scene
Ausgang Value
Ausgang Percent value
Length C R W T U
1 Bit X X X
1 Bit X X X
1 Bit X X X
1 Bit X X X
1 Bit X X X
1 Byte
1 Byte
1 Byte
X
X
X
X