TCL X9 Installation Manual

WALL MOUNT
WMBX925PRO
Wall mount bracket
Subwoofer base
Installation Guide
What's in the Box:
TV connector panel x1
Wall plate x1
Hand screw (M5X7mm) x2 Screw (M5X15mm) x4
Screw (M6X55mm) x6
Screw(M5X6mm) x14

Wall drilling and installation dimension

Minimum mounting dimensions on solid wood
wall: 610(L)x500(H)x70mm(W). (Figure 1)
Note: Make sure the solid wood wall can support the total weight
of the TV and the Wall Mount Bracket.
The minimum thickness of concrete wall should be 100mm,
Drilling dimension 10~11mm(pore size) x55mm(drilling depth).
Note: Use self-tapping screws(M6X55mm) and expansion hoses. (Figure 2)

Important Safety Instructions:

1. When installing the TV set and this wall mounting bracket, at least three professionals are required to
perform all the installation operations. Do not attempt to install by yourself, so as to avoid personal
injuries and property damage caused by incorrect operation.
2. When installing, the installation position should be specified by professionals, so that its strength can
support the gross weight of the TV set and bracket for long time. Also, measures should be taken to
make sure that the installation position has enough strength to bear outside forces. The hanging points
should be stressed on the wall directly. Do not install at positions without enough strength, such as plaster
board, drywall, cement sheeting or similar surfaces. The wall mount MUST be mounted on appropriate
supporting structures like timber, steel or masonry using appropriate fasteners.
In places with few people such as home or hotel rooms, the watching distance is 3 to 5 times the screen
diagonal size. The installation height should be appropriate to your viewing angle.
To prevent accidental damage to the TV set and personal safety accidents, please avoid installing the
bracket at positions that children may easily touch the screen.
3. The bracket should be installed on a vertical surface. Avoid installing on a gradient surface or on the top of
The speaker base x1
the room, otherwise the TV set may fall off and cause personal injuries.
4. If any screws or parts that assembly are loose or lost, switch off and unplug the TV set, and contact
professionals to repair.
5. When installing the bracket, avoid places that are within live electricity or strong magnetic fields,
avoid positions that are susceptible to noise or vibration, and avoid places where flammable gas is
easy to leak.
6. To watch TV programs normally and avoid eyestrain caused by direct strong light and backlighting, avoid
installing the bracket in places where there is direct strong light.
7. To prevent fire, avoid installing the bracket in places with bad conditions, such as heavy smoke, strong
wind, moisture or high-temperature heat sources.
8. When installing, make sure the metal parts and screws are connected tightly, so as to prevent the
screws from becoming loose, which may cause the TV set to fall and risking personal injury.
Expansion hose ×6
9. Read and understand this installation guide seriously, and follow all the instructions strictly. TCL does
not bear responsibility for any damage and loss caused by improper installation and operations.
Netallic gasket x4
VESA 400X200MM VESA 400X200MM
400X200
32mm or 1.3
DISTANCE TO WALL DISTANCE TO WALL
Do not use expansion hose
85
80kg or 96.4lbs
85 TV 85 TV MAX WEIGHT 80KG MAX WEIGHT 80KG
Drilling depth:>55mm
Pore size：010~11mm
Use expansion hose
(Figure 1) (Figure 2)