Advertisement
T7 Wireless Portable Speaker
1.
Switch on your T7 by pressing the power-button on
the right. A white LED lights up. Number of active light
LEDs indicates the state of battery charge.
2.
Press and hold the Bluetooth button on top the T7 for
min. 2 seconds.
See picture on the right > > >
The LED on top will start flashing blue and an audible
feedback indicates the T7 entering the „pairing"
mode.
3.
Open the Bluetooth settings on the source device
and ensure Bluetooth is switched on. Bowers &
Wilkins T7 will appear as an available Bluetooth
device. Select T7 and close the Bluetooth settings.
T7 Bluetooth indicator will flash as pairing is underway
4.
and illuminate fully when pairing is established. T7 will
also provide audible feedback when pairing is
established. (If asked put "0000" as BT code).
5.
Start playback from your smartphone, tablet or enjoy
the sound from an application on your device.
6.
Volume can be adjusted with your smartphone or
tablet. At every time you can control the volume by
(+)- and (-)-button on top the T7.
Find more information here:
www.bowers-wilkins.com
Advertisement
