Table of Contents
Advertisement
XHD7720 OPERATION
General Operation
Escape
Press ESC to exit any menu adjustment mode.
Press AUDIO/MENU momentarily to select between Volume
Audio
(default), Bass, Treble, Balance, Fader, Subwoofer and
Source Volume Level.
VOLUME
BASS
TREBLE
BALANCE
FADER
SUBWOOFER
SOURCE LEVEL
Press AUDIO/MENU until BASS appears, then press SELECT
Bass
to confirm. Rotate volume left/right to adjust (-6 minimum /
+6 maximum).
Treble
Press AUDIO/MENU until TREBLE appears, then press
SELECT to confirm. Rotate volume left/right to adjust ( -6
minimum / +6 maximum).
Note: Any adjustment to the Bass or Treble settings
automatically cancels the current EQ curve (if one is
selected).
Note: Bass and Treble settings are retained for each mode
individually.
Balance
Press AUDIO/MENU until BALANCE appears, then press
SELECT to confirm. Rotate volume left/right to adjust
(BALANCE L12 - R12). BALANCE L=R represents equal
balance.
Press AUDIO/MENU until FADER appears, then press
Fader
SELECT to confirm. Rotate volume left/right to adjust
(FADER F12 - R12). FADER L=R represents equal fader.
Press AUDIO/MENU until SUB-W appears, then press
Subwoofer
SELECT to confirm. Rotate volume left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
The source volume level control allows a gain adjustment
Source Volume Level
for each audio source: AM, FM, CD, AUX, USB and Bluetooth.
Set the source volume level for each mode, depending on
the relative volume of each audio source.
To set the source volume level, press AUDIO/MENU until
SRC LEVEL appears. After one second, the current mode
will appear on the display. Turn the volume knob to adjust
the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation, press MODE until the
desired mode is selected, then set the source volume level
for that mode.
8
Advertisement
Table of Contents
