Technical Data; Unpacking And Preliminary Checks - Newa Mirabello young MIR 30 Instructions And Warranty

Complete aquarium ready to install
Hide thumbs Also See for Mirabello young MIR 30:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
socket. This will prevent water droplets from entering the socket (Fig.2) by running along the cable.
10) Always disconnect the plugs when the aquarium is not in use, before inserting or removing its components and before
cleaning. Do not try to disconnect from the socket or the plugs of the appliances by pulling the cable, but disconnect it by hand.
11) Do not touch the power plugs with wet hands or touch the plugs with your bare hands if they are wet.
12) If the aquarium is within children's reach, take special precautions and check correct installation and operation several times.
13) The maximum water temperature conveyed from the pump must not exceed 35°C.
14) WARNING: the symbol
15) The aquarium must not run dry.
16) The aquarium has glass components. Handle it with care and position it according to the instructions given in this manual,
avoiding placing the tank directly on its edges.
17) Do not place the aquarium on tilting surfaces (Fig. 10).
18) After installation, do not move the aquarium. If necessary, only move it if the tank is completely empty.
19) Each component is an integral pa rt of the aquarium and must not be used with other products.
20) Do not use the aquarium for food use.
21) Do not use the aquarium as a terrarium.
22) Do not use the aquarium if it is damaged and /or dismantled.
23) Do not damage and/or remove the seal on the couplings of the glass panels of the tank.
24) Do not place rocks, stones or other heavy ornamental elements directly on the bottom of the tank.
25) Do not position any objects on the aquarium.
26) It is important for the aquarium, just like all other electrical appliances, to be protected upstream by a special differential
safety switch (safety cutout) with a trip current of Idn < 30 mA.
27) We recommend to switch-off the lamp off during maintenance and never fix it when it is on.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
II. TECHNICAL DATA
Version
(220-240V, 50Hz)
Dimensions
Height (mm)
Width (mm)
Depth (mm)
Weight
Dry (Kg)
Capacity
Volume (l)
Pump
Flow rate (l/h)
Power (W)
Lighting
Rated input (W)
Lumen
Kelvin (K)
III. UNPACKING AND PRELIMINARY CHECKS
a. Open the packaging.
b. Take out the aquarium, handling it with care;
c. Place the aquarium on a smooth flat surface;
d. Dispose of the packaging materials in compliance with current regulations in the country of disposal;
The NEWA Mirabello young aquarium has been packaged so that it can withstand normal knocks and pressures during transport.
However, excessive knocks or incorrect handling may cause damage to the aquarium therefore we recommend you follow these
warnings in order to check that the tank is watertight:
• Place the tank on a dry horizontal surface, on a layer of fabric sheeting or sheets of newspaper.
indicates that the electrical appliances must only be used in homes.
MIR 30 YOUNG MIR 60 YOUNG
333
427
266
6,2
30
160-300
4,5
3,1
309
6340°K
377
624
325
10,5
60
210-440
4,7
5,5
522
6122°
11
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mirabello young mir 60

Table of Contents