Daintree GE current Lumination Tetra PowerGrid Series Installation Manual

Lumination
93013528, 93013522, 93013523, 93013524
(Tetra PowerGrid Series - Gen 3)
®
BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Disconnect power before servicing or installing product.
Save These Instructions
This product is intended solely for the use of nonresidential architecture lighting and is not intended for
use in any other applications.
LED System Features
• Certified to UL 2108
• Low-Voltage Luminaire (24 VDC)
• IP54, dry or damp location rated.
• Compatible with 24 Volt GE LED Drivers
• Dimmable with Current 0-10V Dimming LED Driver or
Current Dimming Module and compatible dimming
controller
Save These Instructions
This product is intended solely for the use of
nonresidential architecture lighting and is not intended
for use in any other applications.
LED Luminaire
®
WARNING / AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Couper l'alimentation avant le dépannage ou avant l'installation
du produit.
Prepare Electrical Wiring
Electrical Requirements
• Do not use in wet locations.
• The grounding and bonding of the LED Driver shall
be done in accordance with National Electric Code
(NEC) Article 600.
• Follow all National Electric Codes (NEC) and
local codes.
For use in the following applications
• Backlighting
• Illuminated Walls or Ceilings
Installation Guide
ARCH015