Advertisement
Lumination
LED Door Replacement
(Recessed Architectural Luminaire Series)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
• Minimum size 18 AWG (0.75mm
Save These Instructions
Use only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
LED Luminaire
®
WARNING / AVERTISSEMENT
).
2
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant d'inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d'alimentation
électrique.
RISQUES D'INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N'utilisez que des fils approuvés par UL pour les entrées/sorties de
connexion. Taille minimum 18 AWG (0.75mm
Installation Guide
IND213
).
2
Advertisement
Table of Contents
Related Manuals for Daintree GE current Lumination Recessed Architectural Series
Summary of Contents for Daintree GE current Lumination Recessed Architectural Series
- Page 1 Installation Guide IND213 Lumination LED Luminaire ® LED Door Replacement (Recessed Architectural Luminaire Series) BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING / AVERTISSEMENT RISQUES DE DÉCHARGES ÉLECTRIQUES RISK OF ELECTRIC SHOCK • Coupez l’alimentation avant d’inspecter, installer ou déplacer le luminaire. •...
- Page 2 Lumination (Recessed Architectural Luminaire Series) Installation Guide ® Door Replacement Steps NOTE: The following steps depict the 2x2 series luminaire. However, the procedure is the same for the 2x4 series. Turn off power. Rotate latches to unlock the front bezel. Swing down panel and lift off front bezel with diffuser.
Need help?
Do you have a question about the GE current Lumination Recessed Architectural Series and is the answer not in the manual?
Questions and answers