Advertisement
Lumination
LBU Recessed Series, 120-277V
BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG (0.75mm2).
CAUTION / ATTENTION - RISK GROUP 2/RAYONNEMENT LUMINEUX GROUPE 2
Risk Group 2: Caution. UV Emitted from this product.
Eye or skin irritation may result from exposure.
Use appropriate shielding. Product tested against IEC62471.
Save These Instructions
Use only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
Components Supplied
• Luminaire
Tools and Components Required
• Slot or Philips screwdriver
• UL Listed conduit connections per NEC/CEC for
nominal conduit trade sizes ½" or ¾"
• UL Listed wire connectors
LED Luminaires
®
WARNING / AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant d''inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d'alimentation
électrique.
RISQUES D'INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N'utilisez que des fils app ouvés par UL pour les entrées/sorties
Groupe de Risque 2: Attention. Ce produit émet un rayonnement UV. Une
irritation des yeux ou de la peau peut résulter de l'exposition. Utilisez les
protections appropriées. Produit testé selon IEC62471.
de connexion. Taille minimum 18 AWG (0.75mm2).
Prepare Electrical Wiring
Electrical Requirements
• he LED luminaire must be connected to the mains
supply according to its ratings on the product label.
Grounding Instructions
• The grounding and bonding of the overall system
shall be done in accordance with National Electric
Code (NEC) Article 600 and local codes.
Installation Guide
A-1024174
22 Series
IND553
Advertisement
Table of Contents
Related Manuals for Daintree GE Current Lumination LBU Recessed Series
Summary of Contents for Daintree GE Current Lumination LBU Recessed Series
- Page 1 Installation Guide IND553 A-1024174 Lumination LED Luminaires ® LBU Recessed Series, 120-277V BEFORE YOU BEGIN Read these instructions completely and carefully. 22 Series WARNING / AVERTISSEMENT RISQUES DE DÉCHARGES ÉLECTRIQUES RISK OF ELECTRIC SHOCK • Turn power off before inspection, installation or removal. •...
- Page 2 Installation Carefully unpack unit from its packaging. Properly Install the unit into the reserved hole in the ceiling. inspect for defects before installing. Wear work If installing more than one luminaire per room, gloves to prevent dirt and oil from being follow instructions on the diffuser label to maintain transferred to the luminaire.
- Page 3 Installation Remove electrical enclosure cover. Remove knock- Install listed electrical fittings in the knockout holes for out for AC line input wires. wire protection. Connect the AC lines (UV and WHITE) to the luminaire internal wires according to the wiring diagrams using 18-14AWG twist-on wire connectors.
Need help?
Do you have a question about the GE Current Lumination LBU Recessed Series and is the answer not in the manual?
Questions and answers