Table of Contents
Advertisement
2. Functions for L5130e/L5160e
The information retrieved from the printer is listed. You can also print the nozzle check pattern and
recovery check pattern.
1
2
3
10
9
1. Model name
Displays the printer model name.
2. Ink level in the ink cartridges
Horizontally displays the ink levels in ink cartridges using a bar chart and displays the value indicated by each
bar when you hover over it.
3. Level in other supplies
Horizontally displays the level in the waste ink bottle, cleaning cartridge, and flushing cartridge using a bar
chart and displays the value indicated by each bar when you hover over it.
4. Status
Displays the printer status.
5. Alerts
Displays messages when an error or a warning occurs. When multiple errors and warnings occur, displays
only one message.
6. Width
Displays the media width automatically detected by the printer (unit: mm).
You can update the media width information automatically. For details, see page 30 "Updating the Media
Width Information Automatically".
7. HStatus (present machine setting)
Displays the heater temperature of the pre-heater, print heater, post heater, and cure heater. The value is
displayed when you hover over the heater name.
8. JStatus
Displays the job status during printing. The status is displayed only when the printer is printing.
9. Nozzle Recovery Check
Prints the recovery check pattern if you click it.
18
4 5
6
7
8
M0DYIC0109
Advertisement
Table of Contents
