pols potten 530-010 Series Instruction Manual

"
Thank you for choosing a pols potten product.
To ensure safe and satisfactory use of this product,
please carefully read the below instructions beforehand.

general information

This table is made of MDF + resin based artificial marble top with matt black powder coated
iron base. This table is for indoor use only.

care instructions

Clean by wiping with a damp cloth and immediately wipe dry with a soft dry cloth.
Avoid contact with abrasive, alcohol and solvent based substances or cleaning agents,
they can damage the surface.
The use of furniture polish or sprays is neither necessary nor recommended.
Remove liquid spills immediately with an absorbent cloth to prevent staining.
Do not strike with hard or pointed items.

safety note

This furniture piece should be moved and assembled by two persons
Always completely lift the furniture in an upright position when moving it. Handle and
move with care as improper handling may cause material damage and personal injury.
Ensure the furniture is always placed level on its legs.
Do not stand, climb or jump on the furniture.
Please keep these instructions for future reference.
components & parts
TABLE TOP STEEL FRAME
A
1x B 14x
BASE SUPPORT PILLAR
C 14x
step 1
"
First loosley assemble all the screws into all the parts. After loosley fitting all screws, proceed to
tighten them firmly to secure the whole construction.
A
B
C
step 3
Pols Potten B.V. can not be held responsible for improper use of the safety instructions or installation of this product other than indicated by the instructions in the
instruction manual.
step 2
A
B
C
"
we advise to put a blanket underneath for protection
Done!
A
B
C
version no.1