pols potten Ribbel 500-040-110 Instruction Manual

Cabinet

step 3

step 4

Thread the strap (G) through the bracket

as shown below. Carefully thighten strap

but do not overtighten.

Pols Potten B.V. can not be held responsible for improper use of the safety instructions or installation of this product other than indicated by

the instructions on the instruction manual.

Attach one bracket (A) to the

backside of the cabinet just below

the top edge of the cabinet by

using the screws (D).

Move the cabinet to its final position on

the wall and mark the location of the

second bracket (A) on the wall.

For concrete walls, drill holes and insert

the plugs (B).

Attach the second bracket (A) to the wall

with the long screws (C).

done!

version no.1

instruction manual

Cabinet Ribbel gold high

design by pols potten studio

500-040-110

Table of Contents

Need help?

Do you have a question about the Ribbel 500-040-110 and is the answer not in the manual?

Page 1 Cabinet Ribbel gold high done! design by pols potten studio 500-040-110 Pols Potten B.V. can not be held responsible for improper use of the safety instructions or installation of this product other than indicated by the instructions on the instruction manual. version no.1...
Page 2 1 “ Thank you for choosing a pols potten product. “ To ensure safe and satisfactory use of this product, Carefully flip the cabinet sideways and hold the frame against it please carefully read the below instructions beforehand. general information This cabinet is made of MDF, partially brass metal cladded with 3 shelves.