Denon DRA-395 Operating Instructions Manual page 15

Adjusting the CHANNEL LEVEL, TONE, and LOUDNESS control
B
MAIN
6
OFF
ZONE 2
ON •
VOLUME
OFF ª
TUNER PHONO
CD
•
PRESET
CDR / TAPE
ª
A SPEAKER B
DIMMER CH VOL
1
STATUS
•
VIDEO SELECT
ª
2
B
REMOTE CONTROL UNIT RC-894
6 5 1 2, 4 3
TAPE
7 0 1
ZONE 3 MULTI ROOM
ON •
VOLUME
OFF ª
V. AUX VCR DVD / VDP
PHONO DVD / VDP
CD VCR
TUNER CDR / TAPE V. AUX
SHIFT
• •
PRESET MASTER VOL
MUTING
ª ª
Adjust the channel levels.
1 Select the channel whose level you want to adjust.
CH VOL
(Main unit)
The channel switches as shown below each time the button is
pressed.
L
2 Adjust the level of the selected channel.
SELECT
UP
DOWN
(Main unit)
The volume can be adjusted between -12 dB and +12 dB in
units of 1 dB.
Adjusting the sound quality (tone)
3 Select the BASS or TREBLE whose you
want to adjust.
4 With the name of the volume to be
adjusted selected, press the SELECT
button to adjust the level.
• To increase the bass or treble: Press
the SELECT UP button. (The bass or
treble sound can be increased to up to
+12 dB in steps of 2 dB.)
• To decrease the bass or treble: Press the SELECT DOWN
button. (The bass or treble sound can be decreased to up to
–12 dB in steps of 2 dB.)
5 If you do not want the bass and treble to be adjusted, turn on
the tone defeat mode.
The signals do not pass through the
TONE
DEFEAT
bass and treble adjustment circuits,
providing higher quality sound.
(Main unit)
6 Press the LOUDNESS button.
Press the loudness button ON when
listening to music at a low volume.
The low notes and high notes will be
corrected to produce a natural sound.
LOUDNESS button can be used when
the TONE DEFEAT ON mode.
ENGLISH
CH VOL
(Remote control unit)
R SW
•
ª
(Remote control unit)
TREBLE
BASS
(Main unit)
SELECT
UP
DOWN
(Main unit)
LOUDNESS
(Main unit)
15