&Tradition Setago JH27 Instructions

Jaime hayon 2019

Instructions

Setago JH27

Jaime Hayon

2019

Congratulations with your new Setago lamp, designed in

2019 by Jaime Hayon. We hope you will enjoy using this

product and follow these instructions to ensure correct

installation. If you have any questions or comments,

please do not hesitate to contact us by mail on:

info@andtradition.com

Table of Contents

Need help?

Do you have a question about the Setago JH27 and is the answer not in the manual?

Page 1 Instructions Setago JH27 Jaime Hayon 2019 Congratulations with your new Setago lamp, designed in 2019 by Jaime Hayon. We hope you will enjoy using this product and follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail on: info@andtradition.com...
Page 2 Setago JH27 Please read these instructions carefully and retain them Step 1 for future reference to ensure that the product is used The lamp is delivered with the shade already attached, Jaime Hayon correctly. For your own safety, please study each step of but without the light source installed.
Page 3 Step 4 When the lamp is charging a red light will show in the bottom of the lamp. When the lamp is fully charged the red light in the bottom will turn off. Step 5 The light intensity of the lamp can be adjusted by touching the brass dimmer knob on the lamp.