Advertisement
3 Operating Positions (0
The Air Mover may be set in one of 3 operating
positions as shown in Fig.5. Pick the position
best suited for your application.
1. 0
0
position (A) Fig.5- For applications such as;
drying wet floors, shampooed carpets, etc. To
use this position simply place unit on its base.
2. 45
0
angled position (B) Fig.5- For applications such as, drying plaster on walls or drying
wet furniture. To use this position, tilt unit backwards.
3. 90
0
position (C) Fig.5- For applications such as; drying paint on the ceiling. To use this
position, lay the unit on the back side with the front grill pointing towards the ceiling.
Cleaning & Storage
WARNING: UNPLUG POWER CORD BEFORE CLEANING, THIS WILL REDUCE THE
RISK OF INJURY FROM THE AIR MOVER ACCIDENTALLY STARTING.
1. Clean your Air Mover before storing it. The
outside of the Air Mover can be cleaned using
a damp cloth to remove any dust or residue.
2. Wrap the power cord around the carry handle
on the top of the Air Mover.
3. If you have more than one Air Mover to store,
they can be stacked during storage as shown
in Fig.6. Stack the units by placing them on
their sides. Do not stack more than 3 Air
Movers high.
4. The Air Mover should be stored indoors in a
dry environment.
Lubrication
No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram
and parts list.
OPERATION & STORAGE
0
, 45
0
, 90
0
)
Figure 5
Figure 6
Advertisement
