Download Print this page
King Canada 8500AM Instruction Manual

King Canada 8500AM Instruction Manual

Air mover

Advertisement

Quick Links

550 CFM AIR MOVER
MODEL: 8500AM
INSTRUCTION MANUAL
COPYRIGHT © 2021 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

Advertisement

loading

Summary of Contents for King Canada 8500AM

  • Page 1 550 CFM AIR MOVER MODEL: 8500AM INSTRUCTION MANUAL COPYRIGHT © 2021 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
  • Page 2: Warranty Information

    Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized service centre, King Canada will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period.
  • Page 3 GENERAL & SPECIFIC SAFETY INSTRUCTIONS 1. Do not leave Air Mover plugged in. Unplug from outlet when not in use and before servicing. Connect to a properly grounded outlet only. See Grounding Instructions. 2. Do not expose to water or rain – store indoors. 3.
  • Page 4: Electrical Information

    ELECTRICAL INFORMATION WARNING: YOUR AIR MOVER MUST BE CONNECTED TO A 120V, 15-AMP. BRANCH CIRCUIT. FAILURE TO CONNECT IN THIS WAY CAN RESULT IN INJURY FROM SHOCK OR FIRE. 120V OPERATION GROUNDED CURRENT As received from the factory, your Air Mover is 120V OUTLET CARRYING ready to run for 120V operation.
  • Page 5 2. On/Off 3 speed selector dial 5. Thermal overload/reset 3. Carry handle/power cord storage 6. Two 120V receptacles (Max. 10 Amp.) SPECIFICATIONS Model ........................8500AM Airflow ............Max. 550 CFM (3 speeds- 420/490/550 CFM) Power cord length ....................10 feet Motor ........................1.0 Amp. Voltage ....................120V, 60Hz, 1 phase Dimensions ..................12”...
  • Page 6: Operation

    OPERATION To safely use your Air Mover, follow these instructions: 1. Unpack Air Mover from carton. 2. To use your Air Mover, place it in the area most suitable for your application. Several factors need to be considered: the Air Mover must be placed close enough to an AC outlet to be plugged in (approx.
  • Page 7: Operation & Storage

    Figure 6 No lubrication is necessary as the motor is equipped with lifetime lubricated bearings. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.