Dell 7609WU User Manual page 28

1
Power
2 Enter
3
Right
4
Down
5
Aspect Ratio
6 Page up
7
Mute
8
Page down
9
Video mode
10 Blank screen
11 Up
12 Left
13 Menu
14 Volume up
15 Laser
16 Volume down
Turns the projector on and off. For more
information, see "Turning Your Projector On" on
page 21 and "Turning Your Projector Off" on
page 21.
Press and hold for 10 seconds to exit the lockup
state and go back to standby mode when
projector is in lockup state. (eg. Lamp error, over
heat etc.)
Press to confirm the selection.
Press to adjust the OSD setting.
Press to select OSD items.
Press to change the aspect ratio of a displayed
image.
Press to move to the previous page.
Press to mute or un-mute the projector speaker.
Press to move to the next page.
The Dell 7609WU projector has preset
configurations that are optimized for displaying
data (PC Graphics) or videos (movies, games,
etc.). Press the Video Mode button to toggle
between Presentation mode, Bright mode,
Movie mode, sRGB, or CUSTOM mode (for the
user to set up and save preferred settings).
Pressing the Video Mode button once will show
the current display mode. Pressing the Video
Mode button again will allow the projector to
switch between display modes.
Press to hide / un-hide the image.
Press to select OSD items.
Press to adjust the OSD setting.
Press to activate the OSD.
Press to increase the volume.
Aim the remote control at the screen, press and
hold the laser button to activate the laser light.
Press to decrease the volume.
Using Your Projector 28