Philips VTR8100 User Manual page 59

14.4.2 TV Mode
TV Mode has two options: NTSC and PAL. When the device
is linked to TV, the correct option is selected based on the
TV mode.
14.4.3 Default Settings
This allows the user to reset the parameters of the device.
14.4.4 LCD Brightness
This allows the user to adjust the LCD to the required
brightness. The LCD brightness has three levels: High,
Medium and Low. Press the "
the desired level. After selecting the level, press the OK
button to confirm, or press the Back button to return to the
previous menu.
14.4.5 System Time
The System Time interface is illustrated below:
" or " " button to select
System time
2015/12/11 16:30
On the interface, press " " or "
" to set the current time. Press "
Year, Month, Day; and press "
value.
14.4.6 Auto Off
If the user does not perform an operation on the device over
a pre-set time, the system automatically shuts down. See the
auto off setting interface reference below:
Auto off
Off
1 Min
2 Min
3 Min
" and " " and "
" and " " to select
" or " " to change these
Auto off
5 Min
EN
59