Changing The Battery - Philips VTR8110 User Manual

16 Changing the battery

16.1 Battery loading
1 Hold the battery door by hand, open the battery button
with your finger, and then open the battery cover.
2 Put battery into the slot as shown in below picture:
3 Close the battery door, press the battery door home.
Note
The battery may explode if it is not replaced properly.
•
Only the same model or type of battery should be used
on the device.
16.2 Battery unloading
1 Hold the battery door by hand, open the battery button
with your finger, and then open the battery cover.2 Take
out the battery.
3 Close the battery door, press the battery door home.
EN
69