Network Problems - Dell Studio 0KWJH0A01 Setup Manual

Beep Code Possible Problem
One Possible motherboard failure -
BIOS ROM checksum failure
Two No RAM detected
NOTE: If you installed or
replaced the memory module,
ensure that the memory module
is seated properly.
Three Possible motherboard failure -
Chipset error
Four RAM read/write failure
Five Real Time Clock failure
Six Video card or chip failure
Seven Processor failure
Eight Display failure
.

Network Problems

Wireless Connections
If the wireless network connection is lost
The wireless router is offline or wireless has
been disabled on the computer.
• Check your wireless router to ensure it is
powered on and connected to your data
source (cable modem or network hub).
• Ensure that wireless is enabled (see "Enable
or Disable Wireless" on page 12).
• Re-establish your connection to the
wireless router (see "Setting Up a Wireless
Connection" on page 15).
• Interference may be blocking or interrupting
your wireless connection. Try moving the
computer closer to your wireless router.
Wired Connections
If the network connection is lost — The cable
is loose or damaged.
• Check the cable to ensure it is plugged in
and not damaged.
Solving Problems
—
45