Advertisement
Quick Links
INSTRUCTION MANUAL
M
ONTAGUE
Solid State Electronic Controls
SL70 (AH, AP) and SL2-70 (AH, AP)
This manual is meant as a supplement to the Gas Vectaire manual. The
contents herein describe the function and operation of the Solid Electronic
Controls. For information on the Gas Vectaire oven installation, operation,
maintenance, service and parts, refer to the Gas Vectaire manual part no.
These instructions should be read thoroughly before attempting installation.
Set up and installation should be performed by qualified installation personnel.
Keep area around appliances free and clear from combustibles.
addendum
Gas Convection Ovens
with
MODELS:
4520-9.
PLEASE RETAIN THIS MANUAL
FOR FUTURE REFERENCE.
THE MONTAGUE COMPANY
1830 Stearman Avenue P.O. BOX 4954
HAYWARD,CA 94540-4954
TEL: 510/785-8822 FAX: 510/785-3342
SL
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MONTAGUE Vectaire SL70
Summary of Contents for MONTAGUE Vectaire SL70
- Page 1 Set up and installation should be performed by qualified installation personnel. Keep area around appliances free and clear from combustibles. PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE. THE MONTAGUE COMPANY 1830 Stearman Avenue P.O. BOX 4954 HAYWARD,CA 94540-4954 TEL: 510/785-8822 FAX: 510/785-3342...
-
Page 2: For Your Safety
CONTENTS INTRODUCTION, INSTALLATION & CAUTIONS OPERATION (Cooking with Solid State Controls) WIRE DIAGRAMS IMPORTANT WARNING: Improper installation, adjustment, FOR YOUR SAFETY: alteration, service or maintenance Do not store or use gasoline or can cause property damage, injury death. Read operating other flammable vapors... -
Page 4: Installation
INTRODUCTION The SL series Vectaire gas convection ovens are very similar to the Vectaire ovens Montague has produced for years. The most significant difference is that solid-state electronic controls are used instead of the elecro-mechanical ones commonly used. The result is the most accurate, responsive and predictable ovens we have ever offered with the recognized dependability of solid-state components. - Page 5 OPERATION Gas Control System - Vectaire SL (all models) Follow the procedures in the main “Vectaire Gas Convection Ovens” manual to light the standing safety pilot on standard models. On models equipped with the optional Electronic Ignition, the procedure in the main manual is to be followed with one exception.
- Page 6 OPERATION Below the indicator lights are the “TEMP” AND “TIME” toggle buttons. These are used for selecting the cook temperature and cook time. Pushing on the upper arrow will increase the setting, and pushing on the lower arrow will decrease the setting. The white “START/CANCEL”...
- Page 7 OPERATION Control Panel - Vectaire SL70AP Models (Cook-n-Hold with Menu Pad Option) The control panel for the SL70AP Models is identical to the Cook-n-Hold model described above, but also includes 5 programmable buttons directly below the option buttons. (See Diagram A) This optional feature is called a MENU PAD.
- Page 8 OPERATION BAKE WITH FAN DELAY(PULSE): (Hi-rise muffins @ 310°F for 22 minutes) Turn the fan control to HI or LO. Enter 310°F in the temperature display. The oven will begin pre-heating. Now, push and release the FAN DELAY button to select this option. Use the TEMP toggle to select “plse”...
- Page 9 OPERATION SERVICING SOLID-STATE CONTROLS When servicing the solid-state controls on the oven, make certain the precautions in the main manual regarding disconnecting power and turning off the gas supply are followed before beginning. RUNNING HOURS: When first turned on the control will display momentarily the total number of running hours logged by the oven.
- Page 11 In order to establish full compliance with Proposition 65, we attached a yellow warning label to each gas fired unit manufactured by the Montague Company. Carbon monoxide would not be present in concentrations that would pose a "significant risk" to the consumer when the equipment is installed, operated and maintained as follows: 1.
- Page 12 When ordering part, to eliminate mistakes and facilitate delivery, always give the following information: Serial No. _____________________________________________ Model No. _____________________________________________ Change No. ____________________________________________ Name & No. of Part Model No. Change No. Serial No. The Montague Company 1830 Stearman Avenue P.O. Box 4954 Hayward, CA 94540-4954 P/N 34455-9 7/04...
Need help?
Do you have a question about the Vectaire SL70 and is the answer not in the manual?
Questions and answers