Icom CS-F14 Instructions page 2

I Connections
All cloning operations are performed from the computer's keyboard—the operation required on the transceiver side is;
First, connect the cloning cable as illustrated below. And then rotate [VOL] to turn power ON.
[VOL]
To [SP]
connector
TRANSCEIVER
I Screen menus description
q w e r t
i
q FILE MENU [File]
Used for saving memory channel contents, printing the
pre-programmed information or quitting the program, etc.
w VIEW MENU [View]
• Selects the displayed font size.
• Turn the Toolbar ON or OFF.
e COM PORT MENU [COM Port]
• Click to display the COM port (1 to 4 and More) setting
dialog box.
• Set the transfer speed (Normal or High).
NOTE: 'Check the following' dialog box appears
when the COM port is not set correctly.
r CLONING MENU [Clone]
Click to display the cloning menu and cloning information
dialog box.
t MODEL MENU [Model]
Click to select the appropriate model name which going to
clone.
y HELP MENU [Help]
Click to display the help contents and cloning software re-
vision information.
u TOOL BAR
Shortcut buttons appear on the tool bar when clicking the
tool bar function in the [View] menu.
i TREE VIEW SCREEN
Click the folder icon which you want to edit.
o CONTENTS LIST SCREEN
Display the contents list (Memory CH information, DTMF
settings, etc.).
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
OPC-478 (RS-232C type)
to RS-232C port
OPC-478U (USB type)
to USB port
y u
o
Attaching:
Attach the jack cover
(q), then tighten the
screws (w).
PC
I Programming information
• Read all the transceiver cloning data into the PC before
starting editing with this software. Otherwise the frequency
data may not be cloned properly to your transceiver.
• Select the model type.
- LMR : Land Mobile Radio. 2Tone function is available.
- PMR : Private Mobile Radio. 5Tone function is available.
• Double click the desired cell in the
memory channel screen directory, or
right-click the cell then click [Edit...
Enter].
- You can click the pull down menu to
select and change the channel set-
ting depends on the item.
- You can edit it directly.
• Click [Help] to display the help
screen for the item.
I Cloning menus
The Memory CH, DTMF, Continuous Tone, SCAN, 2Tone,
5Tone and Common menus allow you to set the transceiver
customised
ï ï Memory CH
Specify the operating frequency and details of the operating
conditions for each memory channel.
ï ï DTMF
Edit the DTMF Codes, and then set the time period/signal
length for the DTMF Timer, etc.
ï ï Continuous Tone
Set the Continuous Tone Setting items for Tone Burst,
CTCSS Reverse Burst Timer, etc.
ï ï SCAN
Set the Scan List settings for Mode type and Power Save
function. And set the Timer settings, etc.
ï ï 2Tone (Available only when LMR is selected)
Set the 2Tone code channel items and the 2Tone RX code
settings.
ï ï 5Tone (Available only when PMR is selected)
Set the 5Tone code channel items, the 5Tone code settings,
Format and User Tone.
ï ï Common
Assign the desired functions to the programmable function
keys and set the set mode items, common items, etc.
NOTE: The above instructions are for reference only.
Please refer to the HELP file of the cloning software for
the function or setting details.
Detaching:
Unscrew (e),
then detach the
jack cover (r).
e
w
q r
(Edit menu)
A-6368W-1EX Printed in Japan
© 2004 Icom Inc.