Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fort ECSPHB
Summary of Contents for Fort ECSPHB
- Page 1 Smart Security Hub ECSPHB...
- Page 2 Appearance Connection button Power adapter input USB Interface SIM card slot Power switch (Full size) HUB LED Indications Red Flashing/Fixed: System Armed Blue Flashing/fixed: System armed in home mode Green Flashing/fixed: System disarmed Red/Blue/Green fixed: Connected to the server Red/Blue/Green Blink Slowly: Wi-Fi network disconnected Green Blink Fast: Wi-Fi network settings EZ mode Blue Blink Fast: Wi-Fi network settings AP mode White fixed: RF connection mode...
- Page 3 Preparation 1. Download the “ClickSmart+” app from the app store. 2. Register using a mobile number or email address. 3. Log into the created account...
-
Page 4: Installation
Installation There are 2 ways to connect the ECSPHB to the ClickSmart+ App. EZ Mode and AP Mode. AP mode is for use if EZ Mode has failed. EZ Mode Step 1 Ensure the system is disarmed before this operation. - Page 5 Enter Wi-Fi Device List Choose Device Password Confirm Set Alarms Hub Status Connecting Name...
- Page 6 Installation There are 2 ways to connect the ECSPHB to the ClickSmart+ App. EZ Mode and AP Mode. AP mode is for use if EZ Mode has failed. AP Mode Step 1 Turn off the Hub before this operation, press and hold the “Connection”...
- Page 7 Enter Wi-Fi Confirm Password Select AP Mode Hub Status Power down the device, press and hold the connection button, and then power the device back up Once Powered back up, continue holding the connection button, until you hear 1 bleep, and the blue LED starts to rapidly ash.
- Page 8 App Operation Operations Device List Interface Interface Accessories Settings Interface Interface...
-
Page 9: Daily Use
Daily Use Arm the system When your system is armed, all detectors are active. By App Connect to your alarm and click on “Arm” By Remote Control Press the “Arm” button on the remote control By SMS Send “1” to the phone number of the SIM card in the control panel. Arm in Home Mode When your system is armed in Home Mode, all detectors are inactive, except those assigned to the Home Zone. -
Page 10: Control By Sms
Control by SMS You will need a (full size) SIM card if you wish to interact with your alarm system by SMS and phone calls How it works For each setting you want to modify by SMS, it works as below: 1. - Page 11 SMS continued Read on for the complete list of settings by SMS SMS code Function SMS code Function check SMS commands Set system language 0001~0015 Settings inquiry English 0001 Disarm the system French 0002 Arm the system Russian 0003 Home Mode Danish 0004 Store Phone numbers...
-
Page 12: Control By Phone Call
This is especially helpful in areas with poor Wi-Fi and/or 3G/4G coverage. How it Works 1. Call the phone number of the SIM card in the ECSPHB 2. The ECSPHB will answer, type your 4-digit passcode on your phone, followed by “#”. (Default passcode is 1234). The passcode can be changed VIA the app. - Page 13 If your alarm is triggered If the alarm is triggered, your control panel will immediately start to inform you: At home: • The built-in siren starts ringing out. • If you have connected additional sirens, they start ringing out too. Enabling Keypress Audible Indication You receive a push notification in the Maxsmart home app (you must have an internet connection on your smartphone).
-
Page 14: Connect Wireless Accessories
Connect wireless accessories VIA the ECSPHB • When the system is on the disarm mode, press once on the connection button on the control panel. You will then hear 1 beep and the LED light will illuminate white to indicate it is in connection mode. - Page 15 Connect with an additional Wireless Siren Your security supports additional wireless indoor and/or outdoor sirens, to enable you to extend your system according to your needs. • Set the siren to connection mode: short press the connection button on the siren, the LED will illuminate; the siren is now in connection mode for 20 seconds.
- Page 16 General Our products are designed to comply with the recommended codes and practice, and is to be installed and serviced by competent persons in accordance with the relevant regulations. Guidance >Smart alarm accessories are specified a maximum of 80meters line of sight in open air. For every obstacle the signal strengh is reduced.
- Page 17 Elite Security Products Telephone : 01527 51 51 50 Redditch B98 8YN Fax: 01527 51 51 43 Email : info@espuk.com Web : www.espuk.com E&OE - Errors and omissions excepted.K21...
Need help?
Do you have a question about the ECSPHB and is the answer not in the manual?
Questions and answers