Daewoo 5510CRA Instruction Manual
  1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. Projection TV
  5. 5510CRA
  6. Instruction manual
Daewoo 5510CRA Instruction Manual

Daewoo 5510CRA Instruction Manual

Rear projection tv
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
REAR PROJECTION TV
REAR PROJECTION TV
INSTRUCTION MANUAL
DSJ-4710CRA / 5510CRA
DSJ-4720CRA / 5520CRA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5510CRA and is the answer not in the manual?

Questions and answers

Related Manuals for Daewoo 5510CRA

Summary of Contents for Daewoo 5510CRA

  • Page 1 REAR PROJECTION TV REAR PROJECTION TV INSTRUCTION MANUAL DSJ-4710CRA / 5510CRA DSJ-4720CRA / 5520CRA...
  • Page 2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

  • Page 3: Important Safeguards

    IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference.

  • Page 4: Replacement Parts

    12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
  • Page 5 Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not remove cover or back.
  • Page 6 This section must be read carefully and followed by the user when installing and transporting the product. Do not put volatile substance-such as benzene, naphtha- near the product since it may cause a change in the product's color. Place the television far away from the view since it may cause damage in your eyesight.
  • Page 7 This product has advantages as follows. Large Screen You can enjoy favorite broadcasting by using a large screen with the size of 55”/47” bases on projection technology. Various Screen You can watch various sizes of screen such as 16:9, 4:3, Panorama, Zoom. 16:9 OPTIONAL ADJUSTMENT OF SOUND You can adjust sound per frequency like Audio since the equalizer is built-in.

  • Page 8: Table Of Contents

    Table of Contents Installation and Maintenance Antenna Connection Video Connection Camcorder & Play station Connection DVD Connection Audio Connection Digital Satellite Receiver Connection Cable TV Broadcasting Connection Name of Each Part Basic Guide To setup device change of remote control Method To Use Basic Menu To Watch TV Automatic Channel Memory...

  • Page 9: Antenna Connection

    Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing.
  • Page 10 CTV Antenna Connection Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. ANT/CABLE 1 When a feeder cable is used ANT/CABLE 1...
  • Page 11 Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 Separate Antenna Connection. ANT/CABLE 1 -10-...

  • Page 12: Video Connection

    You may connect S-Video input to enjoy a clearer and brighter picture images. You can choose and Connection is not necessary in Mono mode. Connect either S-Video or Video input to the unit. When both are connected, the output display will be in S-Video.

  • Page 13: Camcorder & Play Station Connection

    Camcorder & Play station Connection Watching the Camcorder Recording on TV -Use the input jack provided at the side panel of the TV set -Use the same connection method for playstation Video game Playing a Recorded Material and Recording a Video simultaneously -Connect the camcorder and video as follows.

  • Page 14: Dvd Connection

    DVD Connection -480i input signal is possible for DVD input. -DVD screen output is composed of three separate primary color jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players. -The DVD player s audio output must be connected to the DVD audio input socket at the back of the TV set.

  • Page 15: Audio Connection

    Audio Connection Standard Audio Connection -You may minimize the volume of the TV set, and listen to the sound. -The default status of Dolby Virtual is in Line out: Internal . -14-...

  • Page 16: Digital Satellite Receiver Connection

    Digital Satellite Receiver Connection Watching High Definition Digital Broadcasting The signal input of 1080i, 720p, and 480p are available in this product. You may use a general A/V jack for its connection. Digital Satellite Receiver -15-...

  • Page 17: Cable Tv Broadcasting Connection

    Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to any of the Video input 1, 2, & 3. Antenna Input Connection Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver.
  • Page 18 In simultaneous use of antennas for Cable Broadcasting and General Broadcasting You can alternatively use the antenna input 1 or the antenna input 2 if changing setup in the <Menu>, <Channel Setup> or <Antenna>. Connection to antennas for General Broadcasting or Cable Broadcasting Connection to antennas for General Broadcasting or Cable Broadcasting -17-...

  • Page 19: Name Of Each Part

    Name of Each Part Front Panel Buttons on the TV set have the same function as those of the remote controller. Front Panel Button If you turn the TV set off by pressing the main power button at this panel, it is as unplugging the power cord from the outlet since this will prevent all operation of both the TV set and the remote controller.

  • Page 20: Side And Rear Panel

    Side and Rear Panel Side Panel It is convenient to use the input jacks provided at the side panel when connecting to the camcorder or play station. It is also convenient when connecting a personal computer to the TV set, and when listening to the sound through headphones.
  • Page 21 Parts of the remote controller This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. DISPLAY Use it when selecting a channel number of over 100 MENU Use it to make picture adjustment, screen format, sound adjustment, input selection, and utilities.
  • Page 22 Screen Size This feature converts the screen size by changing its aspect ratio. Each time you press the button, it will be changed from 16:9 Panorama ZOOM1 ZOOM2 Auto Picture Standard Cinema Dynamic User Search TV/Video Position When the TV screen image is unclear Do not drop or spill liquid on it.

  • Page 23: To Setup Device Change Of Remote Control

    Philips 009 015 016 023 064 078 083 Samsung 001 033 067 Toshiba -22- Remote Control Setup Code Code Brand Daewoo Mitzubisi Panasonic Philips Samsung Sharp Sony Video Code 001 007 009 012 060 061 086 088 090 094 095 096...

  • Page 24: Method To Use Basic Menu

    - Basic menu appears on the screen if pressing the menu button of the remote control. - There are 5 items of Picture, Sound, Function, Set up and Special in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. Press the “Menu”...

  • Page 25: To Watch Tv

    To Watch TV To Watch TV - Buttons with same name in the main body performs same function. Press the “Main Power” button of the main body. •The buttons of the remote control and the main body operate only when pressing the “Main Power”...
  • Page 26 Press the “Main Power” button. • Press the “Main Power” button of the main body. • The main power lamp turns on in red color. • Press the “Power” button of the main POWER body or the “Power” button of the remote control.

  • Page 27: Automatic Channel Memory

    Automatic Channel Memory Automatic Channel Memory - This is function for the TV to automatically memorize only the broadcasted channel. If setup the Auto Channel, you can simply find out channels with the channel “▼CH▲” button and so need not to select channels by pressing each channel number.
  • Page 28 Select the “Auto Program”. • Select the “Auto Program” with the “▼CH▲” button. Press the “VOL▶” button. • Pressing the “VOL▶” button • On Air TV, searches from 2 • In this case, if pressing the menu Auto Program is completed. •...
  • Page 29 Additional Channel Memory - This is method for additionally memorize channels not memorized due to weak broadcasting signal. - This function is available even in the <Menu> - <Set Up> - <Ch Edit> - <Add/Erase>. -28- Select the Channel to memorize. •...
  • Page 30 - This function is available even in the <Menu> - <Set Up> - <Ch Edit> - <Add/Erase>. Select the Channel to erase. • The Channel to erase with the “▼CH▲” button. • You may select the Channel by pressing the number button. Ex) “13”...
  • Page 31 Minute Adjustment of Channel - This is function to clearly adjust the screen to the minute part when any Channel screen appears as a dotted line or when no color appears or when a stripe figure appears or when the screen is unstable. When color looks separated •...
  • Page 32 Select Ch Edit • The screen appears as in the right if pressing the “Ch Edit”. Other items for Channel adjustment • This item enables to erase, • Select the desired Channel • Performs Add or Erase. • Minute adjust enables to adjust Select Fine •...

  • Page 33: Selection Of Input Signal

    Selection of Input Signal When watching video, Camcorder, Cable TV - See 11p for connection method of TV and “Video”. - You cannot designate channels when watching video. -32- Press the “TV/VIDEO” button. • Screen changes as follows whenever pressing the “TV/Video Input”...
  • Page 34 When watching DTV and DVD (component input) - See 13p, 15p for connection method of DTV and DVD (component input). - Input component video (called as color difference signal) as DVD signal. Press the “TV/COMP.” button. • The screen changes whenever pressing the button once.
  • Page 35 Method to watch by using Menu button -34- Press the Menu button. • Press the “◀VOL▶” button until the “△” mark will come on the “Special”. • Press the “CH▲” button in the “△” mark will come ont the “Special” Select “Component 1”...

  • Page 36: Screen Adjustment

    - The user may select various screens designed in good appearance in respect of a professional without adjusting Press the “Auto Picture” button. • The screen adjustment status changes as following AUTO screens are displayed sequentially whenever PICTURE pressing the button of the Screen mode. •...
  • Page 37 When removing screen noise - Screen noise refers to that screen looks bad as abnormal signal (noise) generates on the screen when broadcasting signals are weak. -36- Press the “Menu” button. • Press the “◀VOL▶” button until the “△” mark will come on the “Picture”.
  • Page 38 When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Sharpness, Color, Tint, Press the “Menu” button and “Picture”. • Press the “◀VOL▶” button until the “△” mark will come on the “Picture”. • Press the “CH▲” button if the “△”...
  • Page 39 Adjustment of Screen Size - Randomly change the size of the screen. Pleasure for enjoying the TV increases further. - This mode does not operation in the component 1 and 2 terminal. (However, the mode operates when 480i is entered into the component 1 and 2 terminal.) - The 16:9 screen operates when power is turned on firstly.
  • Page 40 Method to Setup the Caption Screen Mode - You can watch in character (English) as well as hear sound in watching English caption program. Press the “Caption” button. • Setup performed once continues to keep CAPTION the status as it is. Method to Setup the “Caption”...
  • Page 41 Setup of Parental Lock - This is function to protect children or juveniles from the harmful broadcasting or videotapes. -40- Press the “Menu” button. • Main menu appears as in the right drawing. Select “Function”. • Select “Function” with the “△” mark by using the “◀VOL▶”...
  • Page 42 Press “Password”. • Press Password by using number 0~9. Caution) If using your password, remember it. It is needed for continuous use of this function hereafter. On – Off of the Parental Control is repeated whenever pressing the “◀VOL▶” button. •...
  • Page 43 -42- • Rating of movie is setup even in movie, videotape and other media objects including TV program. • The “▼CH▲” button selects items and the “◀VOL▶” button sets up or cancels each item. • Interrupts program without rating. • Interrupts program of the input terminal for the outside video (video 1, 2, 3).
  • Page 44 “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “◀VOL▶” button after selecting password, the second screen of below drawing appears.

  • Page 45: Selection Of Pip

    Selection of PIP When selecting various PIP - You can enjoy various screens to your taste by selecting various functions of PIP. However, you cannot watch same Channel as main screen in the auxiliary screen. - You cannot also watch the input terminal screen of the component 1 and 2 with a PIP (auxiliary screen). General Screen -44- Press the “Menu”...
  • Page 46 Press the “PIP” button and press the “▼CH▲” button of the “PIP”. • Select the Channel by pressing the “▼CH▲” button at the right of the “PIP” button. • The memorized Channel of the auxiliary screen can be selected. In case of Main/Auxiliary screen In case of both screens...
  • Page 47 When converting both main screen to auxiliary screen -46- Press the “PIP” button and then press the “SWAP” button. • The main screen changes to auxiliary screen SWAP and auxiliary screen changes to main screen. In case of Main/Auxiliary screen In case of both screens...
  • Page 48 4-screen Channel Search Function - You can identify broadcasting contents while sequentially searching for only the memorized channel. Press the “Search” button. ▶ The “▶” mark sequentially moves on the search screen whenever pressing the position button on the search screen. ▶...
  • Page 49 Still - This is function to temporarily stop the main screen or the auxiliary screen currently watched. - You can watch favorite scene, etc without missing important information since you can stop the screen. -48- Still of Main Screen • Press the “Still” button when STILL desiring to still the screen currently watched.

  • Page 50: Sound Adjust

    Sound Adjust When selecting various sound modes Press the “Sound Mode” button. • Sound status changes while the SOUND MODE following screens displays in turn whenever pressing the Sound Mode button. -49-...
  • Page 51 When adjusting sound to taste - The user can enjoy various sounds by adjusting Sound Mode, Balance, Equalizer What’s equalizer? • High quality sound range adjustment method used for audio products. Sound Balance • Function to adjust balance of sound volume of the left and right speaker.
  • Page 52 In case of adjusting equalizer • Select the Equalizer by pressing the “▼CH ▲” button. • If pressing the “◀VOL▶” button, the Equalizer Adjust mode appears. Select and use the relevant frequency by pressing the “◀VOL ▶” button. Adjust sound balance in the same manner, either. Dolby Virtual Sound You can perspective, orientation and a cubic effect through the left/right speaker by developing the existing surround system function.
  • Page 53 Multi-Sound and Stereo - You can select to your taste since multi-sound broadcasting is broadcast in the order of Mono → Stereo → SAP. - In stereo broadcasting, automatic conversion to the status selected in the multi-sound broadcasting is done. - You may also select this function even in <Menu>...
  • Page 54 - You must previously adjust current time in order to reserve Automatic On/Off. Press the “Menu” button and select “Function”. • Select “Function” by pressing the “◀VOL▶” button and then press the “CH▲” button. Press the “Timer” for selection. • Select “Timer” by pressing the “▼CH▲”...
  • Page 55 Setup of Off-time The red lamp turns on even setting up either of Off-time/ On-time. This function is very convenient since TV is automatically turned off at the fixed time if reserving the Off-time for sleeping time or at desired time. If adjusted once, this function operate everyday unless canceling the Off-time setup or pulling the plugs out.
  • Page 56 - This is function to reserve so that TV turns off after a fixed time (10 min. ~ 90 min.) - Adjust sleep time with sleep reservation button of a remote control. Press the “SLEEP” button. • Sleep Off → Sleep 10 → Sleep 20 → Sleep 30 → SLEEP Sleep 60 →...

  • Page 57: Adjustment Of Color Match

    Adjustment of Color Match Adjustment of Color Match - Perform this adjustment when color looks separated or when focus is not suitable or when the screen looks spread, after movement to another place or watching projection TV for a long time. -56- Press the “Menu”...
  • Page 58 Select “Convergence”. Adjust the Convergence. • The “▼CH▲” button selects items and the “◀VOL▶” button changes data of the selected item. • The “◀VOL” button moves color to the left (upper) and the “VOL▶” button moves color to the right (lower). •...

  • Page 59: Selection Of Language

    Selection of Language Selection of Language This function enables to select language of the OSD displayed on the TV screen. Language of the OSD consists of English, French and Spanish. -58- Press the menu button and select “Function” Select language the “▼CH▲ button” Press the “◀VOL▶...

  • Page 60: Troubleshooting

    Please check the following list prior to calling Daewoo Electronics Service Center for assistance Is the TV power cord plugged Has the "mute" button at the into the outlet correctly? remote controller been pressed accidentally? Please check the power cord...

  • Page 61: Standard Of Product

    Consult the service center after promptly cleaning this product with clean water and drying it at a shade. Never plug-in the power cords since electrical shock or damage of part may occur. -60- Model DSJ-5510CRA/5520CRA Receipt Channel VHF 2~13, 14~69 CATV 1~125 CHANNEL Screen Size 139cm...

This manual is also suitable for:

Dsj-4720cra5520craDsj-4710craDsj-5510craDsj-5520cra

Table of Contents