Advertisement
Laser Sight
A.
B.
Power on the laser sight by
Power off the laser sight by
pressing the + button on the
pressing the unlabeled button
side of the device.
on the side of the device.
C.
After powering on the device, use a
standard flat head screwdriver (not
included) to make adjustments to the
adjustment screws on the upper and
right sides of the sight to keep it in
alignment with the aiming laser.
AFTER POWERING ON THE DEVICE, MAKE SURE TO ADJUST THE
LASER SIGHT TO MATCH TO THE AIMING LASER.
WHEN THE DETECTOR IS NOT IN USE, MAKE SURE THE LASER
SIGHT IS ALSO TURNED OFF TO EXTEND THE BATTERY LIFE.
TO PREVENT EYE DAMAGE AND PERSONAL INJURY, DO NOT
LOOK DIRECTLY INTO THE LASER. DO NOT POINT THE LASER
DIRECTLY AT PEOPLE OR ANIMALS OR INDIRECTLY OFF
7
REFLECTIVE SURFACES.
Advertisement
