Related Manuals for ICI TDL 300
Summary of Contents for ICI TDL 300
- Page 1 Edit Text Industry TDL 300 QUICK START GUIDE ICI cameras fall under US Federal Law and Export Control. 2105 W. Cardinal Dr. Beaumont, TX 77705 Phone: (409) 861-0788 Toll Free: (866) 861-0788 infraredcameras.com support@infraredcameras.com We Are IR ™...
- Page 2 IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
Page 3: Package Includes
Package Includes I-Cam Device Charging Cable Power Adapter ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE PRESENT BEFORE BEGINNING INSTALLATION... - Page 4 Set Up The camera is used as a Power on device. handheld device. TURN ON THE DEVICE BY PRESSING AND HOLDING THE POWER BUTTON UNTIL YOU FEEL THE VIBRATION; THEN, RELEASE THE POWER BUTTON. TO POWER OFF THE DEVICE, FIRST DOUBLE-CLICK THE POWER BUTTON TO ENTER STANDBY MODE;...
-
Page 5: Charging Instructions
Charging Instructions Plug the USB end of the Align the metal prongs of the charging cable into the bottom charging cable with the bottom of of the power adapter. the device; then, touch the cable to the device. Magnets will hold the charging cable in place. - Page 6 Plug power adapter into a 110/120V electrical outlet. ENSURE THE IMAGER IS NEAR ROOM TEMPERATURE BEFORE CHARGING THE DEVICE. DO NOT CHARGE IN EXTREMELY HOT OR COLD AREAS. THE BATTERY CAPACITY MAY BE DECREASED IF CHARGED IN AN EXTREME TEMPERATURE ENVIRONMENT. IF YOU DO NOT USE THE IMAGER FOR A LONG PERIOD OF TIME, PUT THE DEVICE IN A COOL AND DRY ENVIRONMENT.
- Page 7 Laser Sight Power on the laser sight by Power off the laser sight by pressing the + button on the pressing the unlabeled button side of the device. on the side of the device. After powering on the device, use a standard flat head screwdriver (not included) to make adjustments to the adjustment screws on the upper and...
- Page 8 Laser Sight Battery Replacement MAKE SURE THE DEVICE IS ON A FLAT STABLE SURFACE WHEN REMOVING OR REPLACING THE BATTERY. Remove battery from battery bay. Use a hex key (included) to remove the two battery bay bolts. Place a brand new, unused Use a hex key (included) to battery in the battery bay.
- Page 9 Website: www.infraredcameras.com You may reach a representative by phone or email Mon – Fri 8:00AM - 5:00PM CST. ICI manufactures complete systems and software. We can provide complete engineering, software, and OEM solutions. Our Fortune 500 clients rely on us for infrared equipment and thermography training (which we offer through the Infrared Training Institute).