Max Cool - Dacor EF48DBSS Use And Care Manual

Setting the Controls (continued)
Setting the Temperature Scale
The indicator light, next to the C° button, is lit when the
„
temperature scale for the freezer and refrigerator displays is
set to Celsius. To change the displays to Celsius (or back to
Fahrenheit), press the C° button.
Celsius Indicator Light
Adjusting the Temperature Setting
NOTE: Wait at least 24 hours between adjustments. Re-check the
temperatures before other adjustments are made.
To adjust the temperature setting:
Press the refrigerator or freezer
„
until the desired temperature is reached.
NOTE: The adjustable temperature range for the freezer is -5°F
to 6°F (-21°C to -14°C). The adjustable temperature range for the
refrigerator is 34°F to 46°F (1°C to 8°C).
Use the table below for guidance if you need to change the
temperature.
CONDITION/
REASON:
REFRIGERATOR too cold
Not set correctly for conditions
REFRIGERATOR too warm
High use or room very warm
FREEZER too cold
Not set correctly for conditions
FREEZER too warm/too little ice.
High use or heavy ice use
Refrigerator Operation
UP () or DOWN () key
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR Control 1°
higher
REFRIGERATOR Control 1° lower
FREEZER Control 1° higher
FREEZER Control 1° lower
Water Filter Monitor
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
The water filter monitor will help you know when it is time to
change your filter. To change the filter, see the Replacing the
Water Filter on page 14.
DISPLAY READING:
99 percent
10 percent
0 percent or flow decreases
A new water filter should display
a reading of 99%. The reading in
the display will decrease as the
filter life is used. When the display
reads 10%, it is time to order
a replacement water filter. It is
recommended that you replace the
filter when the filter display changes
to 0% OR when water flow to
your water dispenser or ice maker
decreases noticeably. See Replacing the Water Filter on page 14.
After replacing the water filter, press RESET and hold for 2
seconds to change the water filter display to 99 percent.

Max Cool

The Max Cool feature assists with periods of heavy ice usage, full
grocery loads or temporarily warm room temperatures.
Press the MAX COOL key to turn on the Max Cool feature.
The Max Cool indicator light will remain on for 24 hours unless
manually turned off.
NOTE: The refrigerator temperature display will remain at 34°F
(1°C) and the freezer temperature display will remain at -5°F
(-21°C) while the Max Cool feature is on. After 24 hours, the
refrigerator will automatically return to the previous temperature
settings.
Max Cool
Indicator Light
6
STATUS:
New filter installed
Order replacement filter
Replace filter