Components; Front Panel - Safety Vision OBSERVER 4112 HVR Hardware User's Manual

7

Components

Front Panel

1 - Removable Hard Drive
provides the main storage for recorded data.
Do not over-tighten the thumb screws.
2 - Mirror SD Card Slot
Insert an SD card into the slot until
it clicks. To remove the SD card, briefly press it in until it
ejects.
3 - USB Port Insert a USB flash drive to download events
quickly without having to remove the SD card or hard
drive, or upload firmware updates. A USB mouse may
also be attached to navigate menus in collaboration with
an external monitor.
4 - Status LEDs
The Status LEDs illuminate to display the
current status of the HVR. See chart at left.
5 - IR Receiver
Receives signals from the included remote
control for configuration.
OBSERVER 4112 HVR HARDWARE USER GUIDE
The hard disk drive (HDD)
6 - Hard Drive Lock
The Hard Drive Lock secures both the
hard drive and the SD card slot for security. See the
procedure for removing the hard drive and SD card on
page 4.
7 - External Monitor Output
here to view live camera views and the configuration
menus.
STATUS LEDS
HDD Flashes when HDD is being accessed
SD Flashes when SD card is being accessed
GPS Solid - GPS searching for signal/Flashing - GPS has locked on
NET HVR is connected to a Foresight PRO server
HTR Internal heater is active
Power HVR is receiving power
REC
HVR is recording video
VLoss
One or more cameras is detached or malfunctioning
ALM Event/alarm has occured
ERR Storage Error - corrupted driver or unformatted drive
Attach an external monitor