Installation; Flat Mount; Security Cover - Safety Vision OBSERVER 4112 HVR Hardware User's Manual

5 OBSERVER 4112 HVR HARDWARE USER GUIDE

Installation

Flat Mount

Secure the HVR to the surface with self-tapping screws or
rivets.
Ensure that the front panel of the HVR remains accessible
and there is a minimum 2.5 inches of clearance for cables.
Do not install the HVR in an area of the vehicle cabin that
could interfere with the safe operation of the vehicle.

Security Cover

After connecting all needed cables to the rear of the HVR
as shown in the Main Wiring Diagram, secure the Security
Cover with the included Phillips head screws as shown in
the diagram.