Table of Contents
Advertisement
after installed
during camera control
PPP with modem
after POST
PPP
with
null
before connected
modem
after connected
Restore button
There is a button hidden in the box for restoring the system factory default settings. When the
system fails to install or operates abnormally, use the included assistant stick in the package
and follow the following procedures to reset the system back to its original status.
Poke the assistant stick into the hole to press down on the restore button. Restart the system by
unplugging and re-plugging the power jack. While keeping the button pressed, the system will
perform POST twice rather than the usual once, which can be observed from the flashing LEDs.
After the system flashes the LEDs for the second time, withdraw the stick to release the button.
The system will have restored factory default settings at that moment.
Power adapter
Connect the power jack of the included power adapter. Connecting the power adapter should
be the last operation while physically installing Video Server.
DVS-301 User Manual v1.00
Building Networks for People
flash
flash
flash
ON
flash
4
OFF
Flash
ON
ON
ON
Advertisement
Table of Contents
