Advertisement
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
1. Shut down the computer, unplug its power cord, and
remove the cover.
2. Insert the DHN-520's board-edge contacts into any
available PCI Bus Master expansion slot. Press the
adapter firmly into the slot, making sure the contacts
are firmly seated.
3. Install the bracket screw that secures the card to the
computer chassis.
4. Replace the computer's cover.
5. Reconnect the computer's power cord and turn the
computer on. If your computer's BIOS is plug-and-play
compliant, it will automatically configure the DHN-520
upon power-up.
!
"
#
$ % &
Installation
5
Advertisement
