Curtis DVD7600 User Manual page 4

Notes on handling
• When shipping the Player, the original shipping carton and packing materials come in handy. For maximum protection,
repack the unit as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the
Player for a long time. They will leave marks on the finish.
• The top and rear panels of the Player may become warm after a long period of use. This is not a malfunction.
• When the Player is not in use, be sure to remove the disc and turn off the power.
• If you do not use the Player for a long period, the unit may not function properly in the future. Turn on and use the player
occasionally.
Notes on locating
• Place the player on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined
stand. The loaded disc may come off the proper position and cause damage to the player.
• When you place this player near a TV or radio, the playback picture may become poor and the sound may be distorted. In
this case, place the player away from the TV or radio.
Notes on cleaning
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not
use any type of solvent, such as thinner and gasoline, as they may damage the surface of the player.
• If you use a chemical saturated cloth to clean the unit, follow that product's instructions.
To obtain a clear picture
The player is a high tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture
quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.
Notes on moisture condensation
Moisture condensation damages the player. Please read the following carefully.
Moisture condensation occurs, for example, when you pour a
UNPACKING
First check and identify the contents of your Combo Player package, as listed below:
VCR&DVD Player
AUDIO cable(red and white)
Video cable(yellow)
Batteries(AAA)
Remote control
RF(Radio Frenquency)Antenna Cable
User's manual
If any item should be damaged or missing, please inform your dealer without delay.
Keep the packaging materials, you may need them to transport your player in the future.
WHERE TO PLACE YOUR COMBO PLAYER
A. Place the unit on a firm, flat surface.
B. When you place this combo player near a radio, or VCR, the playback picture may become poor and/or distorted.
In this situation, move the Combo player away from the other units.
C. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space all around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
The Combo Player is a precision device. If the optical pick-up lens, disc drive parts and head are dirty or worn
down, picture quality can become poor. We recommend regular inspection and maintenance every 1,000 hours of
use depending on the operating environment. ...
Note:
The OSD and illustration in this manual may be somewhat different from the actual situation.
Please take the unit as the standard.
eon r a p ge
1
1
1
2
1
1
1
3
or a ux eo g