Curtis DVD7600 User Manual page 14

VCR Setting
Setting The OSD Display
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2 Press the button to highlight and select the "Option", and
press ENTER button.
Auto Power Off
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2 Press the button to select the "Option", and press ENTER
button.
RF Out
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2 Press the button to select the "Option", and press
ENTER button.
Tape Handling
1 Do not use any tape below. Damage of video head or cut/
coiling of tape may cause failure.
-Tape with mold
-Tape stained with juice or attachments
-Tape having breakage connection
-Disassembled tape
2 Moisture condensation may occur in tape. Moisture
condensation damages the tape. Please use the tape after the
3 Press ENTER button until the appropriate system is
selected.("On" or "Off")
4 Please press SETUP button to quit.
3 Press the button to select the "Auto Power Off".
4 Press ENTER button, until the appropriate system is
selected.("Yes" or "No")
5 Press SETUP button to quit.
3 Press the button to select the "Output Channel".
4 Press ENTER button, until the appropriate system is
selected. ( "CH3" or "CH4" )
5 Press SETUP button to quit.
moisture condensation is disappeared.
3 After use, store tape vertically in a case to prevent loose.
4 Do not store in the following places.
-High temperature and humidity
-Subject generation of mold
-Subject to direct sunlight
-Much dirt or dust
-Near strong magnetic materials such as speaker
13