Vcr Setting - Curtis DVD7600 User Manual

VCR Setting

• Press VCR button to change into VCR Mode and follow the
procedures below.
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
3 Set the current date and time with
1 In VCR mode press the SETUP button on the remote control.
2 Press the button to select the "Program Set" and press
ENTER button.
3 Select "Channel"
• move into desired channel signal with up
channel signal change like the orders below.
cable video 1 video 2
4 Select "Start Date"
• Move into "Start Date "with
desired number to record with up/down button or number
button
5 Select "REC cycle".
• Move into "REC Cycle" with
desired one with up/down button
• REC cycle changes like the orders.
One Time weekly
button or
/down
Antenna
button and then, select the
button and then, select the
weekdays Daily
e t h
P O W U P r a e c o u "
NUMBER button.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press SETUP button after completed.
6 Select Start Time
• Move into "Start Time" with
desired number to record with up/down button or number
button.
button
7 Select End time
• Move into "End Time" with
desired number to record with Up/down button or number
button.
8 Select Tape Speed
• Move into "Tape Speed" with
desired one with up/down button
• Recording speed changes like the orders below.
SP SLP
• Press SETUP button to exit after completion.
• Press NEXT and PREV button to fisnish 8-event
programming.
• Press the POWER button to activate timer recording.
.
12
button and then, select the
button and then, select the
button and then, select the
4