Introduction - Seco SANTINO 7.0 OF PCT Product Manual

1.

Introduction

Thank you very much for purchasing a SECO Northern Europe product. Our products are dedicated to professional
use and therefore we suppose extended technical knowledge and practice in working with such products.
The information in this manual is subject to technical changes, particularly as a result of continuous
product upgrades. Thus this manual only reflects the technical status of the products at the time
of printing. Before design-in the device into your or your customer's product, please verify that this
document and the therein described specification is the latest revision and matches to the PCB
version. We highly recommend contacting our technical sales team prior to any activity of that kind.
The attached documentation does not entail any guarantee on the part of SECO Northern Europe
GmbH with respect to technical processes described in the manual or any product characteristics
set out in the manual. We do not accept any liability for any printing errors or other inaccuracies in
the manual unless it can be proven that we are aware of such errors or inaccuracies or that we are
unaware of these as a result of gross negligence and
SECO Northern Europe has failed to eliminate these errors or inaccuracies for this reason.
SECO Northern Europe GmbH expressly informs that this manual only contains a general
description of technical processes and instructions which may not be applicable in every individual
case. In cases of doubt, please contact our technical sales team.
In no event, SECO Northern Europe is liable for any direct, indirect, special, incidental or
consequential damages arising out of use or resulting from non-compliancy of therein conditions
and precautions, even if advised of the possibility of such damages.
Before using a device covered by this document, please carefully read
 Annex „E-1 Warranty Hints"
 Annex „E-2 Field of Application"
Embedded systems are complex and sensitive electronic products. Please act carefully and ensure
that only qualified personnel will handle and use the device at the stage of development. In the
event of damage to the device caused by failure to observe the hints in this manual and on the
device (especially the safety instructions), SECO Northern Europe shall not be required to honour
the warranty even during the warranty period and shall be exempted from the statutory accident
liability obligation. Attempting to repair or modify the product also voids all warranty claims.
PRODUCT MANUAL
SANTINO
4