5.
Installation and Start Up
The content of this document is limited to explain the device connectors and how to access SANTINO via FTP over
your local area network (LAN) within a few seconds. For advanced hardware specifications and software support,
please refer to chapter
„3.3 Related Documents and Online Support"
5.1
Connection Scheme
L171
LAN
Power
Exemplary Illustration
Pos.
Description
1
Ethernet
2
DC in
3
RS-232
4
USB-Device
5
USB Host (OTG)
CAN/RS485
Speaker
SPI/Keypad
2x RS232
USB-Host
RS-232 (Serial)
Debug-PC / Periphery
Ethernet (TCP/IP) via
cross over cable or switch
Pos.
Description
6
Reset sw
7
Bootselect sw
8
SD card slot
9
Power LED
USB Accessory
Memory stick,
mouse
USB-OTG
USB (Active Sync)
to PC / Development
http://support.garz-fricke.com/projects/Santino/
PRODUCT MANUAL
SANTINO
1 4