General Safety Instructions - 4K5 HD 10 KC Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Completely read through the operating instructions as well as the latest information
!
under the internet link at the end of these instructions. Follow the instructions they
contain. This document must be kept in a safe place and passed on together with
the device.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope of
the specifications.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the
approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or
significant vibration.
– Do not point the beam of light directly into the eyes of people, particularly those wearing
glasses or contact lenses (high dazzling effect) or animals.
– Under no circumstances should you look directly into the light produced by this device or when
it is reflected off specular surfaces. 
– Close your eyes and move your head away from the beam of light if optical radiation hits
your eyes.
– Avoid heat build-up during use, for example, due to the covering the device.
– Do not place the lamp in front of inflammable material when in use. It could ignite.
– Do not use the lamp in traffic.
– Do not leave the lamp unsupervised with children.
– Always respect applicable legislation for working with electrical equipment in order to
reduce the risk of accidents.
– Protect the mains cable from oil, heat and sharp edges.
– The external flexible cable or cord of this luminaire cannot be replaced; if the cord is
damaged, the lamp shall be destroyed.
– The light source of this lamp is not replaceable; when the light source reaches its end of life
the whole lamp shall be replaced.
Safety instructions
Using artificial, optical emission (OStrV
Risk Group 1
CAUTION: Possibility of harmful optical radiation. Hazard for retina from blue light
between 400 and 780 nm. Do not look into the lamp for longer periods during
DIN EN 62471
operation. Can be harmful to eyesight.
04
EN
)

Advertisement

Table of Contents
loading

Table of Contents