Initial Cable Setup; Initial Start-Up With Default Setup - QRS Music Technologies QRS-Connector User Manual

QRS-Connector User Manual
First Time Cable Hook Up, Boot Sequence and Log In
Plug the Battery in
QRS - Connector Boot Sequence
1. Power light will turn green
2. Power, Wi-Fi, Bluetooth will turn solid green
3. Power, Wi-Fi, Bluetooth will then cycle green
4. Power light will be steady green
5. Power & Wi-Fi will be either green, green or green amber(if previously networked)
6. Voice Prompts will then come out of speaker giving serial number, Wi-Fi status, Battery Level
First Time QRS-Connector Setup
Open your devices
settings (smart
phone, tablet, PC..)
Log into the Wi-Fi
network SSID
Enter the password
qrsmusic.com 800.247.6557
Plug Power Adapter In
Speaker
"QRSCxxxxx"
"qrsmusic"
Open your web
browser and
enter 10.3.2.1 in
the address bar
to Access the
QRS-Connector's
App.
7
Hold the
"Lightbulb"
button for two
seconds to turn
the unit on
USB A to
Charger, USB C
to HoHo
Set the
password you
would like to use
for accessing
your QRS-
Connector. You
can also name
your device,
the default is its
serial number.
Or you can
leave it as is and
there will be
no password
protection
QRS Music Technologies, Inc.