Leds And Button Pushes - QRS Music Technologies QRS-Connector User Manual

QRS-Connector User Manual
Up
Function
Arrow
Power On
Power Off
Reset Reboot
Factory Reboot/Reset
Reset Wireless
Reset Settings
Put in Default Mode
Single
presses
Widgets
Selecting Widget
Single press Single press
Default Operation
qrsmusic.com 800.247.6557
LEDs and Buttons
Buttons
Down
Do It Select
Arrow
Hold 5s
Hold 5s
Hold 5s Hold 5s
Hold 2s
Single
presses
Single
press
Hold 2s
Single
Press
Single
Press
Single
Press
Light
LED and Voice Prompt responses
Bulb
Power LED turns on and color reflects battery charge status. Then
first 3 LEDs turn green and cycle as Connector boots up. Voice
Single Press Prompts announce serial number, session status, battery status,
network status. Once booted LED 1 reflects battery status, LED 2
WiFi Status, and LED 3 BT status
Hold 5s All Lights will turn off
Powers down and up board power - all pertinent voice prompts
>8s
announce
Hold 5s Same time - Brings everything back to factory
Hold 5s Same time - clears all settings and puts in standalone
Same time - everything but wireless goes back to factory
Current operational mode ( 1,2,3,4,5 or 6) will be indicated with a
amber LED. Each mode is assigned a widget from the App
Select up or down arrow until you get to mode you want to assign
as the working mode (led 1) default
Selects mode - once led is on the mode you want then push select.
Widgets need to be assigned to a mode in the app first there are 6
possible widgets (6 LEDs)
Amber LED of current widget selected will be on. Default is 1
Select up or down arrow until you get to mode which reflects the
widget you want the Connector to go to (led 1) default
Selects that widget mode
Tracking On depending on set up, select source(s) tags, time
outs...
Starts Recording - if auto record is not turned on
LED 5 is source - color if analog will blink while recording all other
pertinent activity will be displayed
Stops recording - if auto stop and save is not turned on
5
QRS Music Technologies, Inc.