Outdoor Furniture Plus Vinyl Swing Arbor Assembly Directions

FM - 80
Assembly Directions for
!
To avoid personal
injury or damage to
your Arbor, assembly
requires two people.

tools needed:

Hammer
(2) 1/2 " Wrenches
Cordless Drill/Screwdriver
with square drive bit

Package contents

1 Top
2 Sides
4 Braces
1 Hardware Package
4 End Caps
15 Top Slats
Hardware Package
16 5/16" x 41/2 " Carriage Bolts
16 5/16" Flange Nuts
8 Vinyl Hole Plugs
2 ⅜ " NY-Glide
4 3" Scres
30 2" Screws
8 1" Screws
1 Template for Top Slats
recoMMended
ancHor
MetHods
All arbors include
your choice of
anchor option.
CORRECT INCORRECT
Firmly tap bolts into pre-drilled
holes before tightening.
Vinyl Swing Arbor
FM- 33
Assembly Instructions for Vinyl Swing Arbor
Assembly Directions for
FM- 33
Assembly Instructions for Vinyl Swing Arbor
Vinyl Swing Arbor
Assembly Directions for
Vinyl Swing Arbor
Hardware Package
8 - 5/16" x 41/2" Machine Bolts
8 - 5/16" x 5" Machine Bolts
16 - 5/16" Washers
16 - 5/16" Flange Nuts
2 - 3/8" NY-Glide
4 - 3" Screws
Package Contents
1 Top
2 Sides
4 Braces
1 Hardware Package
Proper Care & Maintenance for
Your Fine Piece of Poly Furniture
Poly furniture is made from High Density Polyethylene
(HDPE), a recyclable plastic that will never need to
Hardware Package
be painted or stained. It will not rot or splinter, and it
contains an added UV protective agent to resist fading.
8 ⁄ " x 4½" Machine Bolts
5
1 6
Poly furniture is not affected by most corrosive substances,
8 ⁄ " x 5" Machine Bolts
5
and will not promote bacterial growth.
Hardware Package 1 6
To maintain the beauty of your furniture, clean it
32 " Washers
5 ⁄
1 6
regularly with soap and water. Use only nonabrasive
16 8 5 ⁄ " Nuts " x 4½" Machine Bolts
5 ⁄
1 6
soaps. Do not place flower pots or any items on furniture 1 6
that will leave stains. Do not place hot items directly onto 8 5 ⁄ " x 5" Machine Bolts
2 ⅜" NY-Glide
1 6
furniture to avoid melting. All hardware is stainless steel
32 ⁄ " Washers
4 5 3" Screws
1 6
and virtually maintenance free under normal conditions.
16 ⁄ " Nuts
5
However, in coastal areas, hardware will need regular
1 6
rinsing with fresh water to eliminate rusting.
2 ⅜" NY-Glide
If you properly care for it; you will be able to relax in your
4 3" Screws
fine piece of poly furniture for many years!

RECOMMENDED ANCHOR METHODS

1 2
Use to measure bolts
RECOMMENDED ANCHOR METHODS
ON WOOD DECK
ON WOOD DECK
Use A-23 Simpson
4 - 1" screws per post
Use Simpson A-23 ON WOOD DECK
4 - 1" screws per post Use A-23 Simpson
4 - 1" screws per post
#VSA900
Model# VSA900
Top
Model# VSA900
Model # VSA900
3" screws
3" screws
3 4
not included with units
not included with units
ON CONCRETE
ON CONCRETE
• A-24 bracket at each post
• / " x 1 / " lag bolts
5 1
16 2
• All-American anchor
• Simpson A-24 at each post
ON CONCRETE
• ⁵⁄ 1 6" x 11/2" lag bolts • A-24 bracket at each post
• / " x 1 / " lag bolts
5 1
16 2
• All-American anchor
1 2
Use to measure bolts
5 ⁄
16
⁄
5
16
Top
5" machine bolts
5" machine bolts
4 / " machine bolts
1
3" Screws 2
4 / " machine bolts
1
3" Screws 2
5 ⁄ " x 4½" Machine Bolts
1 6
⁄ " x 4½" Machine Bolts
5
1 6
HARDWARE LIST:
8 - 5/16" x 4 1/2" Machine Bolts
8 - 5/16" x 5" Machine Bolts
HARDWARE LIST:
32 - 5/16" Washers
8 - 5/16" x 4 1/2" Machine Bolts
16 - 5/16" Nuts
8 - 5/16" x 5" Machine Bolts
2 - 3/8" NY- Glide
32 - 5/16" Washers
4 - 3" Screws
16 - 5/16" Nuts
2 - 3/8" NY- Glide
4 - 3" Screws
5 6
ON GROUND
ON GROUND
S.S. Anchor through
S.S. screw eye into ground.
4 stainless steel anchors ON GROUND
S.S. Anchor through 4 lag bolts
S.S. screw eye into ground.
4
3
FM- 40
Tools Needed:
Hammer
21/2" Wrenches
" x 5" Machine Bolts
" x 5" Machine Bolts
Side
7 8
5