Miele HG07 Operating Instructions Manual page 12

Warnings and safety instructions

If the power cable is damaged, it must only be replaced with a
specific cable of the same type (available from Miele Service). For
safety reasons, this must only be done by Miele Service or a service
technician authorized by Miele.
Correct installation

The dishwasher must be installed and connected in compliance
with the supplied installation sheet.

Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury / being cut. Wear
protective gloves.

The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.

In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous countertop which is
secured to adjacent cabinetry.

The dishwasher must only be built into a tall unit if additional
safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the tall unit installation kit and observe the
installation sheet provided. Otherwise there is the danger of the unit
tipping over.

The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the door
cannot fall open.
The appliance must only be operated with properly adjusted door
springs.
If the door cannot be adjusted properly, contact Miele Service.
The maximum weight of the front panel that can be aligned with the
factory fitted door springs is 10–12 kg (depending on model).
12