Download
Share
Print this page
Miele G 5482 SCVi Installation Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dishwasher
  5. G 5482 SCVi
  6. Installation manual

Miele G 5482 SCVi Installation Manual

Hide thumbs Also See for G 5482 SCVi:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Installation
The Miele Waterproof System
Provided your dishwasher has been
installed correctly, the Miele Waterproof
System will protect you from water
damage.
Water intake
Danger to health due to wash
water.
Water in the dishwasher must not be
used as drinking water.
Do not drink any water from the
dishwasher.
Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking
water specification of the country in
which the dishwasher is being
operated.
Connect the dishwasher to a drinking
water supply.
11848190-01
The dishwasher may be connected to
cold or hot water (up to max. 65°C)
supplies.
We recommend connecting to a cold
water connection to reduce energy
consumption.
If energy-saving water heating sources,
such as solar energy circulation
systems, are used, we recommend
connecting to the hot water connection.
This saves both time and electrical
energy costs. Hot water is used in all
programs.
The intake hose is approx. 5 ft (1.5 m)
long. A 5 ft (1.5 m) long, flexible metal
extension hose (tested to
14,000 kPa / 140 bar) is available as an
optional accessory from Miele specialist
retailers or Miele Service.

Advertisement

loading

Related Manuals for Miele G 5482 SCVi

Summary of Contents for Miele G 5482 SCVi

  • Page 1 The Miele Waterproof System cold or hot water (up to max. 65°C) Provided your dishwasher has been supplies. installed correctly, the Miele Waterproof We recommend connecting to a cold System will protect you from water water connection to reduce energy damage.
  • Page 2 *INSTALLATION* 11848190-01 Installation A faucet with a ¾" male thread must be  Risk of damage from leaking provided on site. If this type of faucet is water. not available, only a qualified installer The intake hose is under water may connect the dishwasher to the pressure.

  • Page 3: Water Drainage

    *INSTALLATION* 11848190-01 Installation Water drainage Lay the drain hose so that it does not kink and is not being subjected to The appliance drainage system has a pressure or tugged. non-return valve, which prevents dirty water from flowing back into the ...
  • Page 4 *INSTALLATION* 11848190-01 Installation Venting the water drainage If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. Otherwise, a siphoning effect during a program can cause the appliance to empty itself of water.

  • Page 5: Electrical Connection

    USA: 1-888-99-MIELE(64353) right side of the door. CDN: 1-800-565-6435 A damaged power cord must only be replaced with a genuine Miele cord Specifications by a Miele service technician. The dishwasher comes equipped with a 4 ft (1.2 m) power cord (measured from...
  • Page 6 *INSTALLATION* 11848190-01 Installation Hardwired electrical connection  Prior to making a hardwire It is possible to hardwire this appliance connection to the terminal, remove to an existing power cable. the powercord. Otherwise there will be a risk of electric shock from the ...