felton industries 2TGS7 Assembling Instructions

WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE WALL MOUNTED SPECTATOR SEATING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
WALL MOUNTED SPECTATOR SEATING
PRODUCT CODE (2TGS7)
1
[2TGW5x4]
2
PART No.
2TGW1
2TGW2
2TGW3
2TGW4
2TGW5
2TGW6
2TGW7
2TGW8
[2TGW6x4]
1
[2TGW1]
[2TGW6x4]
[2TGW5x4]
[2TGW1]
PART NAME QTY
MAIN FRAME 2
FLAT BAR 2
2000mm.-SEATING PLANK 4
M10x35mm. CUP HEAD BOLT 4
M6x25 mm. HEX. HEAD BOLT 32
M6 LOCKNUT 32
M10 LOCKNUT 4
4
M10 PLAIN WASHER
[2TGW6x4]
[2TGW5x4]
2
1
[2TGW1]
3
4
[2TSW1] [2TGW3]
[2TGW8] [2TGW5]
[2TSW6/7]
A. Have two external frames
[2TGW1] in place (STEP 1), with
lugs facing inwards and secure
them to the back and front
seating
(STEP2), by using hexagonal
head bolts [2TGW5] and lock-
nuts [2TGW76] -finger tighten .
B. Install
[2TGW1] (STEP 3), and secure
them to the seating planks
[2TGW3], with hexagonal head
bolts [2TGW5] and locknuts
[2TGW6] - finger tighten.
A. Install the rest of the
seating planks [2TGW3] on
the centre as per the
illustrated (STEP 4). Make
sure to secure the seating
planks
frames, by using hexago-
nal head bolts [2TGW5]
and locknuts [2TGW6] -
finger tighten.
4
[2TGW1]
[2TGW1]
[1]
[2TGW2]
[2TGW4]
planks [2TGW3]
the central frame
[2TGW3] to the
P1